View Full Version : Stafford-set up for F/T

steven bough
14-07-2004, 11:46 PM
Has any one used there xray's at Stafford?
And mind sharing there set up.
As when i had a TC3,i had to set it up very different to other tracks.But its been a year or so since ive been.
If any one can help it would be much appreciated-


15-07-2004, 05:16 AM
If you go to the mytsn site I'm sure you'll find a setup there for Stafford. I haven't been to Stafford so unfortunately cant really help you.

Adam Meakin
23-07-2004, 12:20 PM
Stafford is my home track and i could not get my TC3 to go round the track but i run this set up and i was top end of the A final at the last torc meeting
I run white springs all round with 35 oil in the front and 45 oil in the back and the pistons drilled out to 1.2mm and a fixed diff and middle hole role center all round, on the pre-glued take-off 22 with a vectra.

John Stones
01-08-2004, 08:13 PM
that is a good set up i saw the car around ashby, I often run the spool and im tempted to slightly copy adam by putting 40wt xray oil in the rear of my car, gonna turn up at the national and see how it goes first though.