View Full Version : Tekin RS Pro!
damien.hall
17-05-2011, 08:29 PM
Just purchased a nosram x12 13.5 stock motor! Just wondering if you guys had any idea on where to start with the setup for the speedo with this motor around the stafford outdoor track! I was running the gm 13,5 stock motor with these settings.
Start RPM - 5986
End RPM - 30024
Ramp - 3
Delay - 0.16
Boost - 45
Turbo - 15
Timing advance - 100
Is there much anyone thinks i should change fairly new to this! Thanks in advance.
adam_howster
17-05-2011, 09:53 PM
Everything looks ok, i would change your rpm end to 18000 and start to around 5000 maybe a little less and knock your ramp down to 2 try a little more delay .30
damien.hall
18-05-2011, 08:05 PM
is that for the x12???
adam_howster
20-05-2011, 03:33 PM
x12
damien.hall
20-05-2011, 04:44 PM
what timing would you put on the motor???
adam_howster
21-05-2011, 11:27 AM
-15 to start with
What I was running up until last meeting at Aldershot:
Schumacher Mi4LP
Tekin RS Pro (212)
LRP X12 - 13.5 (4 dot -10)
IP 5800mAh (60c)
FDR - 8.50:1
48dp 85/18
Set Up
Voltage Cut Off : 2s
Motor Type : BL-FW
Timing Profile : C2
Tick Box : Sensored
Brake
Drag Brake : Off
Brake Strength : 100
Push Control : 50
Brake Minimum : 5
Throttle
Throttle Profile : 4
Neutral Width : 2
Current Limit : 90
Reverse Speed : 100
Throttle Minimum : 5
Timing
Timing Advance : 100
Boost : 50
End RPM : 20016
Start RPM : 5443
Turbo : 14
Turbo Delay : 0.12
Turbo Ramp : 2
Have now gone to the 1s Green rotor
Temps not gone over 86C
FDR now 9.33:1 on 64DP (114/22)
Not got RPM settings to hand
damien.hall
21-05-2011, 04:06 PM
Thanks mate! Will give that a try! how well did you do with this setup was car quick???
50+ mph
and can jump a car 3m ahead of me on the grid
Powered by vBulletin™ Version 4.0.1 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.