rear shock tower on the front

[A Gower]

how do you put the rear shock tower on the front, as i cant get the car to have any lower than 6.5mm ride height at the front.

i have cut off the the body post bits, so the body fits on

[al]

well put it this way f you can get lower than 6.5 on the rear you can get it on the front as putting the rear shock tower on the front makes both front and rear identicle,

al ;D

[cobra81li200]

you have to use the upper holes for the shock on the shock tower, and use the lower holes for the pin in the C-Hub.

[Darren Martin]

Andrew

when you use the rear tower on the front use the two highest holes on the tower not the bottom two, also what are the shock lengths that you have the shocks set at as that makes a difference

hope this helps

[A Gower]

ive got my shocks 2mm longer than it says in the instructions.

so i have to have the pin in the chub like how it comes on the rear, and the higher holes on the shock tower?

what differnce does the 2 holes on the chub make?

thanks
Andrew Gower

[al]

it changes the hight upon the wishbone. that the wheel is mounted !!!