Dead Zone on KO Esprit 3

[kartdemon]

OK been playing around with my KO Esprit 3 Universe for a while now trying to work how how to get a little dead zone on the throttle stick.

Using the LRP SXX SS and would just like a little dead zone on the throttle. It is very sensative when going from brakes to neutral. On the odd ocasion I have had the car blip forward after going from braking to neutral. Only thing I can find closet to a way around it, is by adjusting the throttle and brake curve to a -10 to -30 or so. However does not really give the best effect and is not the best solution.

I have a GM in my other car and you can adjust the dead zone (Width) on the speedo which is ideal.

Anyone any good ideas on this?

[kartdemon]

So know one has worked this out before?

[MattW]

Not sure it's possible on the radio. As you said, it is usually a speedo option.

[kartdemon]

Well there is an option for something that could be it where by you can adjust the throttle for a 2 or 3 stick position. So each position at a point can have characteristics. But I just could not get it to do what I want.