View Full Version : LiPo Balance Plugs
Glenn Atterton
06-01-2010, 10:41 AM
what do I need? :confused:
got some of these SMC LiPo's on loan and I'd like to balance charge on the Orion LiPo Clubmans charger but
the balance lead doesn't fit to the board that is supplied with the charger
have no idea what type balance plug it is or what is on the Orion balance board
StueyS
06-01-2010, 11:37 AM
The balance plug on the battery looks like a jst-xh to me, need a better pic of the balance board to see what that might be. If you can post a closer pic I might be able to say.
Glenn Atterton
06-01-2010, 11:59 AM
The balance plug on the battery looks like a jst-xh to me, need a better pic of the balance board to see what that might be. If you can post a closer pic I might be able to say.
SMC latest cells use Balance Connector: JST-XH but no pics :(
I'll post a pic later of Orion board later
slow coach
06-01-2010, 02:39 PM
does it fit straight on to the charger balance socket
Glenn Atterton
06-01-2010, 04:53 PM
Balance board plugs into the side of the charger then balance lead from lipo plugs into the board
Just been into LHS and new version of board comes with the correct female on it to take the SMC battery plug :mad:
Also read somewere the MK2 version will charge without the BB plugged in but asks if you want to continue charging without were as th MK1 won't:mad:
bring back 4mm plugs & tubes and the Spintec ICC :D
mad dog
06-01-2010, 06:26 PM
you can get leads for that.
if you know a good shop they will have stock or they could make something up.
StueyS
06-01-2010, 07:08 PM
There is a shop I have used called Robotbirds that does aircraft. They do loads of different balance boards, if you can get a JST-XH board with the right connector for your charger that will sort it. If you look on their website you might be able to find one with the right connector for the charger.
Smooththumbs
06-01-2010, 09:02 PM
Glen get yourself jst xh adapter board cut one side off of the 4s socket on the orion board plug in the jst xh board into the orion board keeping the red reference wire to the same side as the orion input wire, (see photo) have been useing this for twelve months to charge my Grandsons 2s packs
Powered by vBulletin™ Version 4.0.1 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.