PDA

View Full Version : XRAY X11 T-Bar car with 1s-lipo



yinkymoka
15-09-2009, 04:31 PM
Car all set and ready to go. Lipo and sundries fit in with space to spare. Weighs in at 714gms .Could easily reduce this by 20/30 gms . Large tyres, long cables, Steel screws etc.
Set Esc on profile 8 ,On full throttle it sounds like a jet plane . If the speed is as good as it sounds could be in business. Plan to run at Grandprix this weekend.
Novak 10.5 fitted Rollout at 62,5 Cant go much higher Fitted a 37 pinion and 88 spur. I do have a bit of lee way as i have a 38 pinion. See how it goes

LRP SPX settings 2,8,0,0

James_Stewart
15-09-2009, 06:47 PM
I suspect you'll be wanting to turn off the LiPo cutoff Vince; on the Nosram/LRP speedo it's there for 2S packs so will be likely to cause you problems.

yinkymoka
15-09-2009, 08:44 PM
I have run the exact same set up in my GT10 without a problem. Could you explain please what i need to do or look for.

MattW
15-09-2009, 09:09 PM
2,8,0,0 is with lipo cut off disabled isn't it?

PDW
16-09-2009, 12:44 AM
XRay had a prototype link car at the IIC. I expect it will be released later in the year... ;)

John_s
16-09-2009, 05:09 PM
yes mode 2 is nimh/race mode

James_Stewart
16-09-2009, 06:04 PM
Yep, that's now correct - Vince has now edited his post, so my post will make no sense at all now.... (insert witty comment here)