PDA

View Full Version : TRF414 M11 What you get with it???


stevieteee
01-02-2004, 12:50 AM
Hi All,

Hope you can help, found a cracking deal on TRF414 M11 and was wondering what it comes with as standard and do i need any additional Hop-up parts?

Does it come with a Titanium screw set??? etc etc etc?

All info greatly appreciated

Cheers
Steve
KeithA
01-02-2004, 01:01 AM
It should tell you here:

http://www.tamiya.com/english/products/49220trf414m_cm/trf414m_cm.htm
cobra81li200
01-02-2004, 01:06 PM
It does not comes with Ti screws, comes with centre and front one way (no front diff), rear delrin outdrives, steel turnbuckles, plastic pulleys.

What I reckon you should get right out of the box is a front diff (or not if you're used to one ways and running on high bite surface) and Ti turnbuckles. Then the springs set to setup your car (the yellow springs are a bit soft) and a pair of alloy dogbones for the rear (not on the front).

With that your car will be a bit lighter, not underweight but at the legal weight and really really fast.

It's a very good car; very fast straight out of the box.
stevieteee
02-02-2004, 11:55 AM
Been on that page before, not very helpful :(

No Ti Screw set, eeee that Mr. Tamiya!!! Can you get a full Ti screw set for it???

Thanks for the info! What about the ARB's??? Are the kit ones ok or dop I need to purchase up-graded ones??

Steve
cobra81li200
02-02-2004, 12:39 PM
What are ARB ?

There is no "Ti screw kit" from tamiya, but I think Take Off makes one.

Unless the car you're going to purchase is a WCR ?

But you don't really need the Ti screws, it just makes the car completely underweight, I have to put 80g on mine to reach the legal weight...
Dave I
02-02-2004, 06:27 PM
I've got the SSG chassis, Ti turnbuckles and the lightweight bulkheads. I need to add 90g to mine to bring it up to weight!!!

Sent you a PM regarding the Ti screws.

Cheers

Dave
stevieteee
02-02-2004, 11:29 PM
ARB's are Anti-Roll Bars!!!!!
cobra81li200
03-02-2004, 12:05 AM
oops sorry. The kit comes with 3 for front and 3 for rear. You don't need anything else, I've always used the normal front ones, not the WCR kit (which is no longer available, the TA04 TRF kit works, but does not comes with the thicker bar).

So is it a WCR or M2 ? This makes a lot of difference in what comes with it.