View Full Version : Novak Vs Speed Passion..??
vectra
06-03-2008, 08:12 AM
Any differences in performance etc. between the two in 13.5 Turn ?
I am talking
SP 13.5 Motor and GT esc.
Ans
Novak SS 13.5 system
cheers
blocky
06-03-2008, 08:32 AM
Personally,
I have tried the SP13.5 motor with the GT, had a few problems, but now I have the correct settings, it runs perfectly.
Haven't tried the Novak SS system, but I have tried the Novak XBR system.
The SP wins hand down, but I have run the novak SS with a nosram matrix and it ran the same as the SP.
Hope that this helps.
Any differences in performance etc. between the two in 13.5 Turn ?
I am talking
SP 13.5 Motor and GT esc.
Ans
Novak SS 13.5 system
cheers
vectra
06-03-2008, 08:59 AM
Personally,
I have tried the SP13.5 motor with the GT, had a few problems, but now I have the correct settings, it runs perfectly.
Haven't tried the Novak SS system, but I have tried the Novak XBR system.
The SP wins hand down, but I have run the novak SS with a nosram matrix and it ran the same as the SP.
Hope that this helps.
Was just wondering as my son runs the GBT/ss 13.5 pro system.
Thought I might be able to make some Gians bt changing.
I guess stay putt hen with the novak ?
Cheers
vectra
06-03-2008, 05:25 PM
Any other opinions ?
Just asking as I have someone to buy the novak System if i do change over. ;)
Just dont want to make the wrong decision :o
Andy71
06-03-2008, 07:42 PM
I have never run Novak brushless but I am running SP GT speedos in on and off road and I think it is a lot better than the LRP Sphere I ran last year. Very smooth, great breaks and thanks to the hand held programmer very easy to set up.
One thing I would say. A lot of people have been having problems and stating it is the GT, I also had problems to begin with but they were sorted when I set my transmitter up as per the GT's instructions. It is VERY important to set it up as described, i.e. throttle and brake at 100% etc.
scoyle
07-03-2008, 11:35 AM
People seem to be talking about correct settings etc. when setting up the SP and GT. Can someone clarify what this means - is there something special I need to do?
Ian s
07-03-2008, 12:20 PM
People seem to be talking about correct settings etc. when setting up the SP and GT. Can someone clarify what this means - is there something special I need to do?
Just throttle and brake end points at 100% and probably the throttle channel reversed.
Andy71
07-03-2008, 01:36 PM
Just throttle and brake end points at 100% and probably the throttle channel reversed.
I think Ian S has got it about right, I can't think of anything else.
vectra
26-03-2008, 01:34 AM
Well i went and sold my sons Novak System over 2 weeks ago on the Belief that schumacher UK were getting in a new stock of the GT speedo shortly .. well.. almost 3 weeks now and no sign of it coming into stock..Does anyone have any inside info on when they may have them in stock ??
mr4man
26-03-2008, 07:57 AM
Schuy Uk now have stock as of yesterday im told.
vectra
26-03-2008, 09:34 AM
Schuy Uk now have stock as of yesterday im told.
I hope so.
Still shows up as out of stock :(
exint2
26-03-2008, 11:15 AM
They had a delivery but were waiting for a new upgraded software from SP before distributing them. They now have that so I would think they are avaliable now (unless the entire batch was pre-sold which is a possibility!)
mr4man
26-03-2008, 11:31 AM
Im waiting for out order and was told yesterday that they had them
vectra
26-03-2008, 11:39 AM
They had a delivery but were waiting for a new upgraded software from SP before distributing them. They now have that so I would think they are avaliable now (unless the entire batch was pre-sold which is a possibility!)
I had Been on to Mark Marshal about my order so hopefully they put one aside for me :o
scoyle
26-03-2008, 03:04 PM
Upgraded software? Does anyone know what the new software does and can I get it on my current GT?
vectra
26-03-2008, 04:38 PM
Well,
Mark got back to me confirming that they were back in stock
Ordered a GT esc
Ultra Stock BL Motor 13.5T
HiPower Active Capacitor
2X CORE RC - 5000mAHr
UDC20 Universal Balance Charger
And a few spares and shell :cool:
Flash
09-04-2008, 08:09 PM
Someone knows if the SP 13.5T is using 12.0 mm or 12.5 mm rotor?
mr4man
10-04-2008, 06:55 AM
ill strip one later hang on lol
Flash
03-05-2008, 05:36 PM
Richard
did you find some time measuring the rotor? Thanks.
Powered by vBulletin™ Version 4.0.1 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.