PDA

View Full Version : set up



roberto
19-02-2004, 06:05 PM
i have a tc3 racer and i run it on carpet with foams blue on front, greens on the rear.


Can any one give me a good setup for this ;D

Kev_Suggitt
19-02-2004, 06:29 PM
I've ran the stadard kit with 3degree camber on read and 2 on the front, and ive made it into the A main for the last four weeks against some quick cars and good drivers.

roberto
19-02-2004, 06:37 PM
thanks i will hav a go. where do you race. what about the ride hiegth.

roberto
19-02-2004, 06:54 PM
does any one else have idaes every one helps ;D

Kev_Suggitt
19-02-2004, 08:11 PM
I race a teesside, 27stock, indoors, foam tyres, average lap 17.5seconds.

5mm front ride height, 5.5 on the rear.

Sam_Smith
19-02-2004, 08:30 PM
I race on carpet at west bridgeford doing there sunday series (currently leading and can't be beaten I don't think) And I run:-

Front:- 60wt oil, yellow springs, rear shock mount on the front, 40Shore foams.
Rear:- 40wt oil, Red springs, 35-37Shore Foams.

Motors:- Corally 12D gold, Reedy KR 12S, Chameleon 19T all on the same setup.

For 27T stock keep the same shock oil and that the same but change the front springs to red and the rears to Blue.

This is my personal view but everyone has a different driving style so therefore evertone should have a slightly different setting.

I have a start point at evey track of

Front:- 60wt, rear shock mount on the front, blue springs
Rear:- 40wt, silver springs.

Hope this helps

roberto
20-02-2004, 07:47 AM
thanks i will try it
;D