T2 '008 EU Gear Chart

[Rob Fitzgerald]

This is a quick rough and ready gearchart for the EU version of the '008 using the standard 84t spur and the std internal ratio of 2.375.

Please note the inclusion of a pinion sizes does NOT mean it fits.

I'm sure xray will have a much better one soon.

13t - 15.35
14t - 14.25
15t - 13.30
16t - 12.47
17t - 11.74
18t - 11.08
19t - 10.50
20t - 9.98
21t - 9.50
22t - 9.07
23t - 8.67
24t - 8.31
25t - 7.98
26t - 7.67
27t - 7.39
28t - 7.13
29t - 6.88
30t - 6.65
31t - 6.44
32t - 6.23

[Chris ODonoghue]

does the car not come with a gearchart like the 007 then ?

[John Lindsay]

It doesn't appear to, it's still got the quick guide chart, but the one in our cars referred to the NT1 and was talking about over/under driver ratios. and first/second gear ratios.



John

[yellowshark454]

Go to the the team xray forum and you will find the 008 gear chart under the T2 series knowledgebase. The document is the T2 008 quick reference table.

Note that the largest pinion you can run with the 84T spur is the 28T pinion, giving you 7.13. If you want to get your ratio up to the 6s then you will need a smaller spur; total max teeth will be 112 +/- 1; minimum teeth 101 +/- 1

[RayS]

You'll find it here
http://www.teamxray.com/teamxray/showfile.php?file_id=4244

[David]

Using a 64dp 90t RW spur gear(specific Xray 008 spurs) and a 50t pinion = 4.28. And yes, it does genuinely fit. So seriously low ratios are possible, we just have to outlay the spending on various spur gears, not just on a multitude of pinions.

To put it in perspective, using the same 90t spur, a 39t pinion (5.48) is the smallest that'll reach. Yet I can easily reach 8.0FDR with a 96/98 spur.

So to anyone unsure of how to reach a mixture of gearings, just buy a small mixture, 90t, 96t, 104t, 110t, for example. With a sufficient amount of pinions you'll reach any gearing you're in need of.