TC3 Complete Spring Kit

[mr_baz]

Hi all,

Regarding the TC3 Full Spring Kit:

Does anyone know if.... this is a full kit for front and rears or would I need two of these kits 1 for front and 1 for rear? I ask because there is only one pair of each of the springs in the kit....

Probably just having a sleepy morning, but I'm being thick and can't work it out! :- ???

Cheers,

Baz

<No links to shops please>

[Colin Williams]

In the full spring set, you get a pair of each springs. You should only need one set, as you would normally put stiffer springs on the front than the rear.

[Joost van Leeuwen]

Agreed, allthough a lot of the Xray folks on my track do use the same spring up front as in the rear.
But I hardly ever see a TC3 with the same spring all around.
(maybe the TC3 folks are just cheap? ;) )

[graemeC]

It is normal to have stiffer springs on the front.....in standard form the TC3 has golds up front and silvers on the rear.

G...

[Colin Williams]

I think I read that when you are using the rear tower on the front, there should only be one spring rating between the front and rear (rather than two with the standard set-up) - however, having said that, one of Craig Drescher's setup sheets used blue springs all round on carpet!

[Phil C]

Id say just stick with 1 spring set as you wont be running the same all round. Ive tried it a few times but it makes the car very difficult to drive. Even if you do want to run the same all round you can buy another pair of that spring. I very much doubt ull need 2 pairs of every spring.

[mr_baz]

Nice one, thanks again chaps! :)

Baz