Steering

[rob.c]

Hi Guys

Can anyone give me any pointers how to get a xxx-s to turn in sharper

Thanks Rob

[LisaKeen]

In my experience, move the front wish bones back, and to a less effect the rears forward, Put the shock upright, put a bit of toe out on the front.

Depends how much you want.

[Steve_L]

What caster blocks are you running?

[Doughty]

the best thing to help people help you is to post how you are running your car then tell us what you want from the car.

we can then easily spot something that you can change to get this.

its all well and good us giving you adivise such as, go to a shorter front camber link but if you are in the shortest link then that wont help you much.

I understand that some people would not want to post their setups though.

things you could try.

- one-way ::)
- softer front spring
- bigger hole pistons with heavier oil (to get the same static damping but less pack)
- less caster
- shorter front camber link
- lower front camber link (on the shock tower)

it may also be that you have too much rear end. so do the oposite as above to the rear end.

[rob.c]

Iam runnig 4 degrees caster, 2 degrees camber all over, foams (team orion), MVP motor, on a tight indoor track on carpet.

[kriss]

You could try a faster servo, that might make a difference. Or you could put less droop on the front and that will make it a lot more responsive ;)
Chris HTH

[Steve_L]

You could also try less caster.