kev kirk
15-01-2004, 10:42 AM
am i right i assuming that droop is the downward travel of the suspension and chassis roll?
if so what sort of setting should i use (indoor carpet)?
and last of all, as i don’t currently have a droop gauge will the following work:-
set ride height to 6mm
place chassis on 8mm blocks (i.e. 2mm droop)
adjust droop screws until the wheels are just touching (check with a piece of paper under each tyre)
if so what sort of setting should i use (indoor carpet)?
and last of all, as i don’t currently have a droop gauge will the following work:-
set ride height to 6mm
place chassis on 8mm blocks (i.e. 2mm droop)
adjust droop screws until the wheels are just touching (check with a piece of paper under each tyre)