xxx4g+ tiverton

[trekkker]

hi
has anyone got a setup for tiverton as its going to be my first time this sunday,
thanks for any help trekkker

[Doughty]

It has been a long time since Tiverton National, even so, the car that they ran then is far different to what it is now.

I can't give you a magic setup as I have not raced my xxx-4 there but you might want to start with the kit setup other than the following

35wt with black in the front
25wt with red in the back

front shocks mounted on the outer hole in the wishbone (no internal limiters)

you might want to go softer on oil and springs as tiverton can get very 'rippled' its not really bumpy but the ripples can be sorted out by going softer. should also give a bit more grip too.

I like the way the 1way is at tiverton but it will only give you rear wheel braking so it might swap ends quite easily, see how you like it, a diff would make it very stable under braking

hope that helps

[trekkker]

thanks for the info,i have a starting point,what rear hubs do you run normally,on the old losi most people used to run 2deg,is it the same for the new losi trekkker

[Doughty]

on dirt at the worlds I ran 1deg rear hubs (2deg standard inboard) total of 3

if you have some 1deg rear hubs try them, if not, see how the car goes without.

[trekkker]

thanks so much to try(just hope my van makes it)trekkker