Setup for MI2EC at WLRC

[Happyhippo]

Any one who has a good setup for WLRC

let me know

[jo90]

Yep, see below

Front

wishbone spaced as per kit
4 deg caster
.5 deg toe out
shock (top = inner / bottom = outer)
30wt
White spring
3 hole piston
-1 camber
5mm ride full droop
Spool

Rear

Wishbone spaced med/long until grip comes up then space mid/short then short
standard toe
shock (top = 1 out from inner / bottom = outer)
35wt
white spring
3 hole piston
-2 camber
5.5mm ride full droop


This gives a very stable car, turn in is gentle until power on then it pulls around the bend quickly but stable. Id run stock on between 26-28 pinion to 88 spur (think this brings it to around the very high 5, very low 6 ratio). You will want to carry as much speed into the first complex as possible (wide on last part of the D to pull in fast for the apex keeping full power on)

[Skiddins]

Have a look in the 'Setups' on the main list of forums. :)

Skiddins