19t Gearing For a C2 Motor?

[Skiddins]

Hi, can anyone recommend gearing to start with for a C2 (laydown brush) style 19t motor.

I know that the 'typical' stock gearing is 6.1, which is also dependant on the layout.

Is there a typical starting point for C2 19t's?

Thanks
Skiddins

[jason]

For West London I would start at 5.15 for the full circuit but it will need trueing and brushes every 2-3 runs geared that high, you may want to start a lillte lower than that.

Jason

[Mike Haswell]

For a C2 round West London I would go for 5.4 and 5.25 for a lay-down TOP.

[Mark Stiles]

For West London I would start at 5.15 for the full circuit but it will need trueing and brushes every 2-3 runs geared that high, you may want to start a lillte lower than that.

Jason

Ditto!

[nismo]

c2 start at about 5.2.-.3 then adjust if you want more acceleration or top end.
it needs maintenence. c2 needs alot more than the other ones i found.
peak/orion were my faverioute ones. laydown top can motors i found worked well. geared at about 5.18