Corally 12m set-up plymouth

[griff]

Hi everyone again.

I've been asked to put up my set-up from the national on here, so here it is.

Front- 1.0mm springs
green syrup (extra hard)
thin graphite roll bar
silver tyres 44mm
4mm ride height
2 washers for caster
3/4 additive for 15mins

Rear- tube dampers with red syrup (soft)
GRP t-bar
low roll centre
20wt oil centre shock with gold spring
gold tyres 50.5 mm
4mm ride height
additive 25 mins

Body- Corally short nissan/protoform nissan
Additive- Jack the gripper

I found the car was a lot easier to drive with the nissan body, but I needed to change the set-up slightly to get some more steering.

Andy.

Quote: I found the car was a lot easier to drive with the nissan body, but I needed to change the set-up slightly to get some more steering.

Andy compared to which other body do you mean?

[griff]

Hi PizzaDude,

I normally run the Corally Merc body. I ran this all last year using TC1, but with the new additive (Jack the gripper) I have found that the car is very agressive and hard to drive with the Merc. :(

Andy.

Andy,

I agree.
I allready figured yuo meant the Merc.

I just got the Nissan in, so, I'll try that one soon.

Thanks.