View Full Version : ride height problems
06-12-2003, 01:06 PM
I am having trouble setting the ride height with my corally sp12g3.
Sometimes it is perfect, i then pick it up, put it back down, then the hole thing has gone completly wrong.
Whats going on here, its annoying me, and the front and back are alot height than the middle.
Do the batts afect the ride height???
06-12-2003, 01:11 PM
batteries will affect ride height, as they are the heaviest component of the car!.
Get the car ready to run with batteries in (they don't have to be charged) and then set your ride height. The easiest test is check that the back is not lower than the font (should be level-ish) and a pound coin can be used to set the height.
If the height is way off, use the other ride height adjustors (rear)(corally has a set numbered 1-2-3) and these can be used upside down to give additional options to set the correct height.
Also, check that the ride height adjustors are one piece, they have a tendency to break easily if you catch a barrier side on at speed.
06-12-2003, 06:53 PM
If your at MK tomorrow I'll have a look at it for you.
06-12-2003, 08:29 PM
Thanks both of you, and i will be at mk.
There is another question, but i may aswell ask tomorow.
Thanks for the help.
Powered by vBulletin™ Version 4.0.1 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.